Basic Information

Reference Number

0000304222

Issuing Organization

Defence Construction Canada - Pacific Region

Solicitation Type

NPP - Notice of Proposed Procurement (Formal)

Solicitation Number

ES25SLMD_KN85062

Title

Quick Response Multi-Discipline A&E Consultant Services Source List

Source ID

FD.CC.B.C..862067.1143664.C111108

Details

Location

Canada, British Columbia

Purchase Type

Duration: 2 years

Description

Defence Construction Canada (DCC) is inviting consulting firms to apply to be placed on a quick response consultant source list to provide “as and when required” professional services related to commercial, residential, industrial, and institutional construction work required by the Department of National Defence, at CFB Esquimalt and will cover all CFB Esquimalt satellite sites, including CFMETR Nanoose, CFAD Rocky Point and CFS Masset on Haida Gwaii.
DCC plans to establish a source list for Multidisciplinary Architectural and Engineering consultant services including, but are not limited to, the following:
1. Architectural and Engineering work of various disciplines such as structural, mechanical, electrical, materials, transportation, building envelope, and code compliance;
2. Minor Civil works in support of other Architectural and Engineering services only, including roadway construction, pavement, new concrete installations, in/above ground service installations, drainage and shoreline erosion control and other works civil in nature;
3. Specialized consultant services for the installation of fencing, fuel tank and related piping/accessory replacements, and inspections of various building architectural, structural, and other engineering services; and/or
4. Specialty Consultants including traffic/transport and programming consulting.
Only consulting firms with offices within 50 km of CFB Esquimalt Dockyard (located in the Township of Esquimalt, B.C.) will be considered for inclusion on the list. NOTE: If a firm or any other associated company as defined in section 256 of the Income Tax Act ((1985, c. 1 (5th supp.), has more than one office or division within the radius mentioned above, only one office or division may apply for inclusion in a source list.
Each source list will be established for a period of two (2) years with an estimated maximum value of up to $600,000 for each source list. Individual commissions under a source list should be between $5,000 and $75,000. The maximum value of a commission is $100,000. DCC reserves the right to suspend or extend the use of a source list at any time. The establishment of a source list does not constitute a commitment by DCC to spend the maximum estimated value of $600,000 for each source list.
Consulting firms wishing to join one or more of the source lists must submit their application by submitting the RESPONSE FORM through MERX's electronic bidding system by the closing date and time indicated in the MERX electronic bidding system.
The language selected by the applicant for a source list will be the only language used for the request for proposal documents, the contract documents and communication for all future requests for proposals and during the execution of any resulting contract. The language selected will apply for the duration of a source list.
Faxed, mailed, or emailed submissions will not be accepted.
Consulting firms will be selected on a rotational basis and asked to confirm that they have the necessary qualifications to meet the requirements of the commission. Once DCC is satisfied that the consulting firm's qualifications are acceptable, DCC will attempt to negotiate a service agreement with the firm. If an agreement cannot be reached, DCC will have the exclusive right to terminate negotiations at its discretion and resume the process with the next consulting firm in the rotation.
Some contracts under this source list may require deliverables to be produced (plans and specifications, reports, etc.) in both official languages. Only firms that indicate in their response form that they have the capability to produce deliverables in both official languages will be considered for these contracts.
Consulting firms will be required to comply with the laws, codes, municipal by-laws that apply to the design and, where applicable, review the design with the appropriate public authorities for the purpose of requesting and obtaining the necessary consents, approvals, licences and permits for the contract.
Consulting firms shall be eligible to be licensed, certified, or otherwise authorized to provide the necessary professional services to the full extent that may be required by provincial or territorial law in the Province or Territory in which the project is located.
DCC reserves the right, at its sole discretion, to:
1. Continue using existing source lists that may already be in place for similar or related services,
2. Establish other source lists for specific categories of professional services which may require different requirements. Such other source lists will be advertised openly on MERX on a case-by-case basis.
By requesting to be placed on a quick response consultant source list, the consulting firm certifies that:

it has read and understands the Ineligibility and Suspension Policy;
it understands that certain circumstances, as described in the Policy, will or may result in a determination of ineligibility or suspension under the Policy;
it is aware that Canada may request additional information, certifications, and validations from the consulting firm or a third party for the purpose of making a determination of ineligibility or suspension;
none of the circumstances described in Appendix 2 of the Policy that will or may result in a determination of ineligibility or suspension, apply to itself, its affiliates or its proposed first tier subcontractors; and
it is not aware of a determination of ineligibility or suspension issued by Canada that applies to it.

Consulting firms are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A consulting firm that receives an unacceptable or failing score may be removed from a source list and receive no further invitations under any source list.
Consulting firms are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A consulting firm that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from all source lists and received no further invitations.
Consulting firms are advised that commissions and contracts under a source list may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET. To be eligible for contract award, a consulting firm will be required to, among other things, actively hold all required security clearance(s) to be invited to submit a proposal.
Consulting firms who do not currently hold an organization security clearance, and who wish to be sponsored, must:
1. submit a Sponsorship application during the period of the Source List;
2. complete and submit the sponsorship application package; and
3. have been selected for the Source list (Their application for the Source List has been accepted).
“sponsorship application” means the activity of having completed the questionnaire on the DCC web page and having forwarded the answers to the DCC Industrial Security Program (ISP)”. https://www.dcc-cdc.gc.ca/industry/security-requirements
“sponsorship application package” means the activity of completing and forwarding the following forms to the DCC Industrial Security Program (ISP): the Application for Registration (AFR) for Canadian legal entities form, the Company Security Officer form, the Security Agreement form, the Security Clearance form, the Fingerprints Applicant form, the Alternate Company Security form and the Personnel Screening form”.
DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the consulting firm has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm.
By submitting a response to this invitation, consultants are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the source list.
This opportunity is not subject to trade agreements.
You have questions regarding the foregoing, or you wish to be removed from a source list, please contact:

Defence Construction Canada
An Kun Fang
[Ankun.fang@dcc-cdc.gc.ca]

Dates

Publication

2025/10/03 04:20:03 PM PDT

Bid Intent

Not Available

Closing Date

2025/10/17 02:00:00 PM PDT

Contact Information

An Kun Fang

236-464-1965

Ankun.Fang@dcc-cdc.gc.ca

Bid Submission Process

Bid Submission Type

Electronic Bid Submission

Pricing

No Pricing

Bid Documents List

Item Name	Description	Mandatory	Limited to 1 file
Bid Documents	Documents defining the proposal	Yes	Yes
No entries

Additional Bidding Instructions

The submission is a completed RESPONSE FORM uploaded into the MERX Bidding System. No other documentation is required.

© MERX - All rights reserved. No part of the information on this Web Site may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior permission of MERX and the Minister of the participating government department (if applicable). MERX, the Minister nor the Contracting Authority will assume responsibility or liability for the accuracy of the information contained in the publication.