MANITOBA REFERENCE NUMBER: MB-MBPB-AAR-00233
ISSUING DEPARTMENT: Procurement Services Branch
DATE ISSUED: 19/07/2021
ISSUED BY: Rafael Silva
TELEPHONE: 204 945-6361
Solicitation # 28392
The Request for Quotation (RFQ); The Government of Manitoba requires the
supply and delivery of OEM Joma Snow plow blade systems for our Vehicle
and Equipment Management Agency (VEMA).The successful Bidder will be
responsible for all products specified in Appendix A.
Submissions are requested to provide these products on an "as & when
requested basis" for approximately a One (1) year term commencing
approximately September 1, 2021 to August 31, 2022. There will be an
option to extend for Two (2) additional One (1) year terms by mutual
agreement.
Manitoba requires its suppliers to adhere to Provincial labour laws and,
where businesses use sources outside of Canada, Manitoba expects
suppliers to comply with local labour laws in the country of
manufacture.
NOTE:
ALL THE PRODUCTS SHOWN ARE SPECIFIED ON A NO SUBSTITUTE BASIS.
APPROVED PRODUCTS ARE SHOWN FOR EACH ITEM AND ONLY THOSE PRODUCTS/BRANDS
WILL BE CONSIDERED ON THIS TENDER
Item 10 on Appendix A; Please indicate the markup % on items ordered
from time to time as described, based on a cost plus factor of Vendor#s
FOB warehouse landed cost.
Governing Law:
This procurement will be interpreted, performed and enforced in
accordance with the laws of the Province of Manitoba and of Canada as
applicable
GENERAL TERMS & CONDITIONS:
Bidders must "login" to MERX to access the General Terms & Conditions
which apply to this RFQ, in addition to those shown below. After
"login" follow the links: Information -> Government Publications ->
Manitoba Terms and Conditions -> Request for Quotation.
Any issues with MERX can be addressed by contacting MERX Technical
Support at 1-800-964-MERX (6379), or email merx@merx.com
SUBMISSION TERMS AND CONDITIONS:
The Bid MUST be signed by a representative of the Bidder with the
authority to bind the Bidder. The name and title of the representative
signing the Bid should also be printed below their signature.
Bids MUST be received at the Submission Address no later than the
closing date and time:
Submission Deadline Date: August 3, 2021, 12:00:00 Noon (Central
Standard Time
Vendor's e-mail address: (if available) ___________________
Quantity clarification: quantity listed contains 2 or 3 decimals.
For tender inquiries, clarification and/or additional information
regarding any aspect of the products may be sent by e-mail and to be
directed only to the individual specified below:
John Pereira
Category Lead
Procurement and Supply Chain Division/Manitoba Infrastructure
Email: John.Pereira@gov.mb.ca
E-mail subject line shall be the RFQ number and title as provided in the
first page of this document
Inquiries should be received no later than 5 days before Submission
Deadline. If an inquiry is received later than that inquiry deadline
date, Manitoba may respond but is not obligated to provide a response.
If a Bidder has sent an inquiry and has not received any
acknowledgement, the Bidder should follow up with Manitoba. In any
event, Manitoba is not responsible if a Bidder#s inquiry does not reach
Manitoba by the requisite date shown above.
Only information provided in writing by the Manitoba contact above will
be binding on Manitoba. Information provided verbally will not be
binding on Manitoba.
If Manitoba, in its sole discretion, determines that an inquiry will be
of interest to all Bidders, it will be communicated in writing to all
Bidders. The source of the inquiry will be kept confidential
*BIDDERS MUST INDICATE THE BRAND NAME & PRODUCT CODE ON EACH ITEM
OFFERED IF APPLICABLE; (See Appendix A and complete in full as
required). ITEMS NOT INDICATING A BRAND NAME MAY NOT BE CONSIDERED IF
APPLICABLE.
*IF YOU ARE QUOTING ON AN IN-HOUSE BRAND, PLEASE SPECIFY THE
MANUFACTURER'S NAME PROVIDING PRODUCT TO YOUR COMPANY***
*BRAND NAMES SHOWN REPRESENT PRODUCTS APPROVED FOR PURCHASE TO DATE.
SOME APPROVED PRODUCTS LISTED MAY NOT BE ACCEPTABLE FOR USE AT ONE OR
MORE OF THESE FACILITIES.
*ALL THE PRODUCTS SHOWN ARE SPECIFIED ON A NO SUBSTITUTE BASIS.
APPROVED PRODUCTS ARE SHOWN FOR EACH ITEM AND ONLY THOSE PRODUCTS/BRANDS
WILL BE CONSIDERED ON THIS TENDER.
VENDORS WISHING TO OFFER ALTERNATIVE PRODUCTS FOR FUTURE TENDERS ARE
INVITED TO SUBMIT SAMPLES FOR LONG TERM TESTING AND EVALUATION BY
CONTACTING THE END USER. ACCEPTANCE OF NEW PRODUCT BRAND(S) WILL BE AT
MANITOBA'S DISCRETION.
*THE LOWEST PRICE ON ANY ITEM WILL NOT NECESSARILY BE ACCEPTED.
PLEASE NOTE:
BID PRICING MUST BE VALID FOR A MINIMUM OF 60 CALENDAR DAYS
Bidder's Quotation Reference Number: ___________ (if applicable)
See Specifications provided and Cost Schedule (Appendix A) for further
details.
_________________________________________________________________________
ITEM QTY DESCRIPTION DELIVERY
NO. DATE
========================================================
ITEM 10 31/08/2022
1.00 Dollar GSIN: N3800MATERIAL: 65541
OEM PARTS, FOR THE PURCHASE OF UNSPECIFIED ORIGINAL EQUIPMENT PARTS FOR
JOMA BLADE SYSTEMS
========================================================
ITEM 20 31/08/2022
30.00 Each GSIN: N3830MATERIAL: 68467
BLADE, RUBBER, 47 3/4 INCH,
JOMA BLADES #JOMA 6000
========================================================
PURPOSE:
The Request for Quotation (RFQ); The Government of Manitoba requires the
supply and delivery of OEM Joma Snow plow blade systems for our Vehicle
and Equipment Management Agency (VEMA).The successful Bidder will be
responsible for all products specified in Appendix A.
The successful Bidder will be responsible to bid on all product
specified in Appendix A. Product will be ordered on an "as & when
requested basis" for approximately a One (1) year term commencing
approximately September 1, 2021 to August 31, 2022.
Manitoba has the option to extend the term of the Contract for Two (2)
additional One (1) year terms by mutual agreement unless either party
provide 30 days written notice of their intent to terminate to each
other.
The Contract may be amended to include additional products or locations
and/or the duration of the Contract may be extended to continue past the
expiry date specified above
Requested quotations should be submitted per the outlined process and
requirements and provide Manitoba with detailed features, costs and
delivery capabilities for the specified goods and/or services.
It is the intent of the Manitoba Central Services Procurement and Supply
Chain (PSC) to award this tender to the least number of Bidders able to
provide the goods and/or services in the most convenient and
cost-effective manner.
BIDDER ASSISTANCE:
The Bidder shall assign a "Dedicated Service Representative(s)" to
supply information and act as contact person through the term of the
agreement. Manitoba will assign a counterpart.
It should be clearly understood that the Bidder's service
representative(s) would deal with the assigned Manitoba contact
person(s).
Bidder shall provide contact names and telephone numbers for the
following:
Contact Person: ________________________________________________
Telephone Number: _________________ Fax Number: _________________
E-Mail Address: ________________________________________________
DEFINITIONS:
BIDDER - Refers to the person who or Company which obtains a copy of the
RFQ for the purpose of submitting a quotation to provide the goods.
BID # refers to the Bidder#s written submission in response to this RFQ
and shall include the Form of Offer completed in accordance with this
RFQ and all bid documents that must be completed or provided in order to
constitute a responsive Bid
CONTRACT - Refers to the Value Contract issued to the Vendor as the
award document.
MANITOBA - Refers to the Manitoba Government.
#Must#, #Shall#, #requires# or #required# # refers to something is
mandatory. If a Bid does not contain or comply with a mandatory element,
the Bid will be rejected and not evaluated further
PSC - Government of Manitoba Procurement and Supply Chain
QUOTE - Refers to the quotation submitted by a Bidder in response to the
RFQ.
RELEASE ORDER - Refers to a specific Release Purchase Order document
issued by MANITOBA to the Vendor to order product from the Contract.
RFQ - Refers to the Request for Quotation document issued by Manitoba to
invite offers (i.e. prices) from Bidders.
SPECIFICATIONS - are that portion of the contract documents, wherever
located and whenever issued, consisting of the written requirements and
standards for the Work and the procedures for determining whether the
requirements and standards have been met, and includes the documents
identified in Appendix A of this RFQ;
SUBMISSION DEADLINE - means the date and time set out on the title page
of this RFQ or any amendment to that date and time made by Manitoba by
way of addendum prior to that date and time
VENDOR - Refers to the person who or Company which will provide the
goods as a successful Bidder.
VEMA - IS A SPECIAL OPERATING AGENCY OF MANITOBA CENTRAL SERVICES.
SPECIAL NOTES:
Bidders to quote a single price for each item offered for duration of
contract.
Bidders may quote on one or more of the approved products listed,
however, Bidders to quote only one price for each approved product
listed.
Bidders offering items which deviate from the requested pack size, case
quantity, etc. must detail the deviations on the return tender. Pricing
unit must be the same as requested (i.e. per package, per case, etc.).
If your pricing is based on a different unit than requested, you must
the clearly identify the change on that item offered.
BIDS:
Bids are requested from competing Bidders in accordance with Manitoba
policies. Manitoba reserves the right to revise/cancel RFQ's as well as
accept/reject bids either in whole or in part, whichever is in the best
interests of Manitoba. Lowest or any bid not necessarily accepted.
Bids must be submitted on the form provided unless otherwise stipulated
or as directed. Failure to complete the bid submission or include all
information and documents requested may result in rejection of a bid
submission.
All bid submissions should be prepared in a legible manner. Non legible
bids may result in rejection of your bid submission.
Bids shall be considered firm until awarded, unless otherwise indicated.
Any exchange of information with Manitoba personnel prior to the
issuance of an RFQ is not a valid response to the RFQ and shall not be
considered.
Mandatory Requirements for evaluations of the bids;
1.,,Completed, signed and returned RFQ document (All areas requiring a
signature, initials, or an entry must be completed and returned with the
Bid)
2.,,Completed and returned in full Appendix A designated requirements as
an Excel file
Submission of Quotation deadline:
MERX Electronic Bid Submission www.MERX.com
12:00:00 Noon (Central Standard Time) # August 3, 2021.
IRREVOCABILITY OF QUOTATION:
By submission of a clear and detailed written or facsimile notice to
Manitoba, the Bidder may amend or withdraw its quotation without penalty
prior to the closing date and time. Upon closing time, all quotations
become irrevocable.
ALTERATIONS/BID REPAIR:
No bid shall be altered, amended, repaired, or withdrawn after the
specified closing date and time. Manitoba issuing the RFQ is the sole
agency empowered to negotiate or alter any term, condition or
stipulation of the bid and/or any subsequent award or event arising
there from.
QUALIFICATIONS OF BIDS:
Any terms, conditions, or stipulated qualifications on bid submission
that is contrary to, or inconsistent with the RFQ documents, may be a
cause for rejection.
Bidders are cautioned to avoid making deviations and exceptions to the
terms and conditions of the bid documents which may result in rejection
of their bid.
ACCEPTANCE OF BID CONDITIONS:
A Bidder should clearly understand, by submitting a bid agrees, that its
bid or any part of its bid is subject to the following conditions, in
addition to any other terms and conditions set out in the RFQ.
No bid will be considered from a Bidder where Manitoba, in its sole
discretion, determines that a potential conflict of interest exists. No
bid will be considered that is in any way conditional or that proposes
to impose conditions on Manitoba that are inconsistent with the
requirements of the RFQ and the terms and conditions stipulated therein.
The submission of a bid, the receipt of a bid by Manitoba and the
opening of a bid, or any one of those, does not constitute acceptance,
in any way whatsoever.
CONTRACT TERM:
To be delivered on an "as and when requested basis" for a One (1) year
term commencing approximately September 1, 2021 to August 31, 2022.
Manitoba has the option to extend the term of the Contract for Two (2)
additional One (1) year terms by mutual agreement unless either party
provide 30 days written notice of their intent to terminate to each
other.
IF THE FIRST OPTION YEAR IS EXERCISED, THE EXPIRY DATE WILL NOW BE
August 31,2023. IF THE SECOND OPTION YEAR IS EXERCISED, THE EXPIRY DATE
WILL NOW BE August 31,2024.
The Contract may be amended to include additional products or locations
and/or the duration of the Contract may be extended to continue past the
expiry date specified above
The delivery date (if shown) is actually the end of the contract period.
GENERAL AWARD INFORMATION:
No award may result from this RFQ process. If this RFQ process results
in an award, then Manitoba reserves the right to award any Contract/
Agreement, in whole or in part, and may accept goods and/or services
from one or more Bidders in such quantities as shall be advantageous to
Manitoba.
Pricing will be a consideration on individual items but preference maybe
given to overall pricing for groups of items consolidated for shipping
and receiving at the facility. The lowest price on any item will not
necessarily be accepted.
Volume of items will be considered. Items will be consolidated to allow
for reasonable delivery quantities.
Past performance of vendors and quality of product will be considered.
TENDER EVALUATION (Split Award):
Generally the lowest overall price of an acceptable item(s) in
accordance with the terms & conditions of the RFQ may be awarded the
order. However, other factors as stipulated below (in no particular
order) will be considered when awarding a contract.
Tenders will be evaluated based on the following:
- Delivery Lead Times;
- Price;
- Product description/specifications requested;
- Quality of the Bidder's performance in past awards;
- Quality of the proposed product in past awards;
- Return & Refund Policies;
- Warranty periods;
- Suitability of product offered compared to end-users needs; and
- Any other terms & conditions indicated on this RFQ.
Each product offered may be considered individually and this may result
in more than one contract awarded from this RFQ. Like items or items
that need to be compatible may be considered as a "group" for "price
comparison" and/or "award purposes".
Failure to provide adequate information to evaluate the item offered may
be cause for rejection of your quote by the Manitoba Government
(Manitoba).
The intent is to evaluate the quotations based on the Contract term
outlined
The lowest price on any item will not necessarily be accepted.
QUALITY/ACCEPTABILITY:
Any product supplied must be new, unused, first quality and be of
merchantable quality for sale in Canada.
All goods delivered are subject to inspection prior to delivery
acceptance. Signing of any delivery slip should not be construed as
acceptance of the product delivered. Manitoba reserves the right to
reject any product, after final inspection that does not meet the
specification or product description requested.
Manitoba reserves the right to reject any product supplied which, upon
inspection or use, is deemed by the using department to be unacceptable
for their intended use. Products to be supplied as specified on the
contract/purchase order.
Any substitutes shipped without prior written approval will be rejected
at time of delivery or held at shipper's risk pending return
instructions Products rejected by the using department will be returned
to the Vendor for full credit or replacement product at no cost to
Manitoba or the contract may be cancelled.
Unless specifically requested in the RFQ, all goods supplied must be
new, current or most recent production.
Products should be delivered and packaged in a manner that is consistent
with the normal business practices of the industry.
PRODUCTS:
Any item shipped where quality is questionable will be returned to the
vendor at their expense.
Any product offered may require testing prior to acceptance. The
product offered must meet the requirements and expectations for its
intended use.
If it is your intention to offer an item, which does not meet all the
specifications / description as outlined, then you must indicate all
intended deviations or changes on the return quote.
Brand names shown represent products approved for purchase by various
facilities. Some approved products listed may not be acceptable for use
by this facility.
Bidders must indicate the brand name of all products offered. Items not
indicating a brand name may not be considered.
SAMPLE PRODUCTS:
Bidders may be required to provide a sample of each proposed product as
part of the evaluation process. Manitoba will notify the Bidder(s) when
samples may be required. Samples shall be supplied at no charge and
delivered FOB Destination Prepaid. Products may be tested up to and
including destruction. Failure to provide an acceptable sample will be
cause for rejection of your quote.
ALTERNATIVE PRODUCTS:
Bidders shall quote on products exactly as specified above, if possible.
Supplier catalogue numbers may be shown for reference.
If an alternative product is offered, product description (including
illustrated literature if available) and manufacturers name and product
number as well as your product reference number (if applicable) to be
shown for each item offered.
Any alternative product offered which has not been recently evaluated
and approved might not be accepted for this quote.
Have the alternative items you offered been evaluated and approved by
the end user?
Yes _____ No _____ Initial__________
If Yes, indicate approved by whom:
Name: ___________________________________________________________
Date: ___________________________________________________________
QUANTITIES:
The quantities shown are estimated volumes and are to be used for
evaluation purposes only and are not a guarantee of business.
Manitoba reserves the right to cancel any item in part or in total due
to program or funding changes, throughout the life of the contract.
Any unused portion at the end of the contract term will be considered
cancelled.
FIRM PRICING:
Bidders offering prices subject to change without notice or in effect at
time of shipment may be outright rejected. Preference will be given to
Suppliers offering firm pricing.
Bidder to quote firm pricing for the term outlined for each line item.
Pricing for any Extensions will be mutually agreed by both parties
within Thirty (30) prior to expiry of the contract.
Is pricing firm for the contract term?
Yes _____ No _____ Initial__________
IF NO, SHOW DURATION OF FIRM PRICING.
PRICES FIRM UNTIL: ________________________________________.
Unit costs must include shipping costs free on board (FOB) to any point
identified in this RFQ. All unit prices should be to two decimal and
should be extended and totaled. In case of a mathematical error, the
unit price shall govern.
Unless otherwise stipulated in writing, all submitted pricing shall
represent the total cost to Manitoba including all duties, shipping,
crating, packing, storage, delivery and handling charges, etc.
FOB/FREIGHT:
All prices quoted to be FOB DESTINATION, Freight Prepaid and delivered
to the destination by the user department anywhere in the province of
Manitoba. Unit prices shall include all necessary charges for a total
landed cost (e.g. freight, insurance, handling, etc.).
Delivery Charge:
Deliveries inside of Winnipeg will be no charge.
Deliveries outside of Winnipeg will be charged on a per order basis via
common carrier (to be shipped prepaid and charge).
Deliveries will be shipped to:
DELIVERY ADDRESS:
1550 DUBLIN AVE
WINNIPEG MB
R3E 0L4
PHONE: (204)945-5951 KEVIN MORISON
1525 1ST STREET NORTH
BRANDON MB R7C 3B3
PHONE: (204)726-6816 JEAN PASCHE
257 Industrial Road
DAUPHIN MB R7N 3B3
PHONE: (204)622-2273 KIM URIAS
375 3rd Street E
THE PAS MB R9A 1L2
PHONE: (204)627-8282 KEN HUCULAK
7 Gay St
THOMPSON MB R8N 1N7
PHONE: (204)677-6548 DAN CONNER
PR #302
BEAUSEJOUR MB R0E 0C0
PHONE: (204)268-6263 JON PAYMENT
ALL DELIVERIES SHALL BE COMPLETED WITHIN FIVE (5) WORKING DAYS FROM THE
DATE OF REQUEST OFF THE CONTRACT.
THIRD PARTY DELIVERIES:
If deliveries are done by a 3rd party courier company, the Vendor is
responsible to make arrangements with a company whose drivers are
"AUTHORIZED / LICENSED" and "BONDED" and meet the same Manitoba#s
delivery requirements.
If any charges are not included please explain in detail any/all charges
which will be extra to the unit prices quoted and will be charged on the
invoice.
Is there a minimum order/shipment value for FOB Destination Freight
Prepaid and delivered pricing?
Yes _____ No _____ Initial __________
If Yes, please indicate the minimum order/shipment value
$_________________
Should an order be placed under the minimum order/shipment value, is a
delivery charge applicable?
Yes _____ No _____ Initial __________
If Yes, identify the delivery charge: $_________________________
If, however, a Delivery/Freight Charge will be extra and applied to some
or all shipments then please advise:
Delivery Charge will be extra and applied on all shipments: Yes_____
The Delivery Charge will be:
Actual Carrier Charges _____ or Flat Rate Charge _____
If Flat Rate, the charge will be $ __________ per shipment.
Bills of lading should accompany all shipments made.
DELIVERY/SERVICE QUALITY:
The Vendor must comply with best commercial practices to ensure that the
goods arrive safely at the destination, and that all goods must be
shipped freight pre-paid, F.O.B. destination, unless otherwise stated.
Deliveries will be accepted Monday to Friday between the hours of 7:30
AM to 3:00 PM, Central Standard Time. Deliveries outside of this time
frame may be rejected as the receiving areas will be closed.
Time is of the essence, and the Service/Supply/Work must be delivered or
fully performed by the date or dates specified in the Contract. No
change in the scheduled delivery or performance dates will be permitted
without Manitoba#s written consent. No acceptance of the
Service/Supply/Work after the scheduled delivery or performance date
constitutes a waiver by Manitoba of any term or condition that requires
the Vendor to deliver or perform at a future date.
Failure to meet the delivery time (i.e. lead-time) indicated on the
Contract may result in the cancellation of the Contract item and any
outstanding Contract Release Orders.
All Master Safety Data Sheets (MSDS) or Vendor#s specification sheets
must be provided with each shipment/delivery, if required by Manitoba.
Bidders should indicate which items are normally stocked and which are
not normally stocked.
Bidder to indicate the normal delivery lead time required from receipt
of a Release off the contract for:
Stocked Items: Delivery within __________ working days
Non-Stocked Items: Delivery within __________ working days
Manitoba requires all deliveries to be completed and shipped within
three (3) working days from the date of request off the contract.
The length of delivery time and overall service to the end user is
important and will be monitored. Failure to provide acceptable delivery
and/or service may result in the cancellation of the balance of the
contract.
RETURNS/REFUNDS:
Any product supplied deemed unacceptable by the end-user/customer will
be immediately replaced with new product/unit at no charge to Manitoba?
Yes _____ No _____ Initial __________
Manitoba requires complete details of your Return/Replacement/Refund
Policy. The Bidder shall identify the exact detail as to what is
covered in terms of responsibility for repair/replacement/refund of
product:
___________________________________________________________
___________________________________________________________
___________________________________________________________
Any/All costs associated with the return/replacement/refund of defective
products will be the responsibility of the vendor?
Yes _____ No _____ Initial __________
All defective products are requested to be replaced within five (5)
working days of notification/request. If five (5) working days is not
sufficient time for replacement, the Bidder shall state the number of
days required: __________________
Goods ordered in error by Manitoba will be returned for credit/refund.
The Vendor shall pick-up the product on their next delivery day.
WARRANTY/SUPPORT & SERVICE:
Bidders shall ensure that Manitoba receives the manufacturer's warranty
for the goods purchased.
Yes ____ No _____ Initial __________
Bidder shall indicate the warranty for each item offered.
Notwithstanding any manufacturers' warranties (which are to be supplied
where applicable), all goods must be warranted to be free of defects in
workmanship and materials for a suitable period of time consistent with
the nature of the goods.
Despite anything in the RFQ, if a defect is not corrected during the
Warranty Period within a reasonable time frame, Manitoba may reject the
goods. If the goods are rejected the Vendor must:
a) Remove the goods, at its expense and risk within a reasonable time
frame after notification that the goods have been rejected; and
b) Immediately, at Manitoba's option, either replace the goods, or if
applicable issue a credit or refund to Manitoba for all monies paid.
If the warranty period is not the same for all items offered then
indicate the warranty on a product by product basis.
Please note: During the period of the warranty offered, all labour,
transportation, parts, surcharges including shipping and brokerage will
be included. The Province of Manitoba "will not" pay additional charges
while the item(s) offered are under the above stated warranty.
Vendor to address warranty issues within 48 hours of receiving faxed
documentation from Manitoba.
Yes ____ No _____ Initial __________
Vendor must provide copy(s) of warranty documentation to Manitoba on
request, after the contract is awarded.
ORDERS/RELEASES:
Release Purchase orders will be issued by Vehicle and Equipment
Management Agency (VEMA), throughout the contract period, referencing
the specific Value Contract.
Orders for items may be placed at any time during the contract period
and in various quantities.
Releases off this contract will be made by phone, fax, mail or other
electronic method.
Each Release Purchase Order will have a specific reference number. The
Release Purchase Order number should be shown on the invoice.
Release Purchase orders will list the specific items and quantities
required and provide the delivery and invoice address.
The vendor shall not ship any item until a Release off the contract has
been requested by authorized personnel referencing the awarded Value
Contract.
All the products listed on the Release Order must be delivered and
invoiced completely as one shipment with no back orders unless approved
by the departmental contact person shown on the Release Order.
How do you prefer to receive the purchase orders from Vehicle and
Equipment Management Agency (VEMA)?
By email__________ or fax_______________?
INSPECTION:
Final inspection and acceptance or rejection of the goods will be made
promptly as practicable, but failure to inspect and accept or reject
goods promptly does not mean that the Manitoba Government has accepted
these goods. The Government of Manitoba reserves the right to inspect
the goods for up to 90 days after the date of delivery.
Partial acceptance of rejection of an order does not release the Bidder
from its responsibility to complete the order.
TIME IS OF THE ESSENCE:
Time shall be of the essence hereof.
ASSIGNMENT:
The Bidder shall have sole responsibility for the quality, liability,
coordination and completion of all work outlined in this endeavor.
Manitoba considers the Bidder to be the sole contact regarding all
Contract/ Agreement matters.
The Bidder shall be prohibited from assigning, transferring and
conveying, subletting or otherwise disposing of any Contract/ Agreement
of its rights, title or interest therein, or its power to execute such
Contract/Agreement without the previous written approval of Manitoba.
COST OF BID:
Costs incurred in the preparation, presentation and submission of a Bid
shall be borne entirely by the Bidder.
ERRORS AND OMISSIONS:
Bidders must advise Manitoba of any errors or omissions they find in the
RFQ document prior to closing so that the RFQ can be revised and
communicated to all Bidders.
EXTENSION AND ADDITIONAL PRODUCTS:
By written agreement between the Government of Manitoba (Manitoba) and
the Vendor, the Contract may be amended to include additional products
or locations and/or the duration of the Contract may be extended to
continue past the expiry date specified above.
USAGE REPORTS:
The vendor must provide to Procurement and Supply Chain Division an
annual contract report indicating the actual usage during each contract
year. The date and times for this report will be as requested by the
Procurement Officer, Procurement and Supply Chain Division. (Normally,
this request will be three months prior to the expiry date of the
current contract.)
The report must show:
a),,The quantity shipped by line item and the dollar values as per the
contract.
b) Individual items ordered against the contract but not listed on the
contract and the dollar values.
GOVERNING LAW:
Unless the Request for Quotation specifically state otherwise, the
request for quotation, all bids, and any subsequent purchase
order/contract(s) will be construed and interpreted in accordance with
the Laws of Manitoba and where the vendor uses sources outside of
Canada, those businesses comply with local labour laws in the country of
manufacture.
The Bidder shall be in good standing under The Corporations Act
(Manitoba), or properly registered under The Business Names Registration
Act (Manitoba), or otherwise properly registered, licensed or permitted
by law to carry on business in Manitoba, or if the Bidder does not carry
on business in Manitoba, in the jurisdiction where the bidder does carry
on business and may be required to provide evidence thereof upon
request.
All RFQ's are subject to the Agreement on Internal Trade, or any other
inter-provincial agreement.
All applicable laws of the Province of Manitoba, regulations and
standards, including all Occupational Health & Safety, and Workers
Compensation requirements will govern this Request for Quotation and any
resulting purchase order/contract.
Manitoba requires its Bidders to adhere to Provincial Labour Laws, and
to declare that in bidding for the work and in entering into a purchase
order/contract, the vendor and his subcontractors conduct their
respective business in accordance with established International Codes
as they relate to Child and Forced Labour embodied in United Nations
(UN) and International Labour Organization (ILO) conventions as ratified
by Canada.
INDEMNITY:
The Bidder warrants that there are no patents, trademarks or other
rights restricting use, repair or replacement of the material furnished
or any part thereof and hereby agrees to indemnify and save harmless the
Province of Manitoba, its employees and agents from and against all
claims, demands, losses, costs, damages actions, suits or other
proceedings by whomsoever made, filed or prosecuted in any manner by
reason of such use, repair or replacement of the materials being a
violation of any patent, trademark or other right.
The successful Bidder shall indemnify and save harmless Manitoba from
and against all losses and claims, demands, actions, payments, suits,
recoveries, judgment and settlements of every nature and description
brought or recovered against Manitoba by reason of any act or omission
of the Bidder, the Bidder's agents or employees, or sub-contractors in
the performance of this contract.
INFRINGEMENTS:
Bidder warrants that Manitoba's purchase, installation and/ or use of
the goods and/or services covered hereby shall not result in any claim
of infringement, or actual infringement of any patent, trademark,
copyright, franchise or other intellectual property right.
INSURANCE:
The Bidder shall, at its own expense, effect and maintain for the
duration of its services all insurance(s) required by law. All required
insurance shall be underwritten by insurers acceptable to Manitoba.
Liens, Claims and Encumbrances:
Bidder warrants and represents that all the goods, materials and/or
services supplied shall be free and clear of al liens, claims and
encumbrances of any kind.
TERMINATION:
Manitoba may, in its sole discretion, immediately terminate a purchase
order/contract in writing if:
A) The vendor fails to properly fulfill, perform, satisfy and carry out
each and every one of its obligations under the purchase order/contract,
or
B) The vendor fails or refuses to comply with a verbal or written
request or direction from Manitoba within three (3) days of receiving
the request or direction; or
C) The vendor become bankrupt or insolvent or liquidates; or
D) A receiver, trustee or custodian is appointed for the assets of the
vendor, or any partner thereof; or
E) The vendor or any partner thereof makes a compromise, arrangement, or
assignment with or for the benefit of the creditors of the vendor or of
that partner, as the case may be; or
F) The vendor fails to secure or renew any license or permit for the
vendors business required by law; or any such license or permit is
revoked or suspended; or
G) The vendor or any partner, officer or director of the vendor is found
guilty of an indictable offence; or
H) The vendor fails to comply with any law or regulation relating to the
employment of its employees; or
I) The vendor at any time engages in any activities or trade practices
which, in the opinion of Manitoba, are prejudicial to the interests of
Manitoba, or a department or agency thereof; or
J) There is a breach of any provision of the purchase order/contract;
K) The goods provided by the vendor are not according to the contract or
otherwise unsatisfactory; or
L) The services provided by the vendor are unsatisfactory, inadequate,
or are improperly performed; or
M) The vendor has failed to meet the delivery date indicated on the
purchase order/contract or repeatedly failed to meet the delivery lead
time, indicated on the purchase order/contract.
Manitoba may, in its sole discretion, terminate the purchase
order/contract at any time by giving at least 30 days written notice to
the vendor prior to the intended termination date. This termination may
be used for those instances where there are program changes, funding
changes, etc.
Termination of a Purchase Order will not constitute termination of the
Contract or any remaining Purchase Orders.
If a Purchase Order has been issued prior to the expiry of the term of
the Contract, and that Purchaser Order includes a delivery or completion
date which extends beyond the term of the Contract, all applicable terms
and conditions of the Contract shall continue to apply to the Purchase
Order until the Service/Supply/Work is fully performed and accepted, or
is terminated, whichever occurs first.
Upon the expiry or earlier termination of the Contract, the Vendor shall
cease to perform any further Service/Supply/Work. Manitoba shall be
under no obligation to the Vendor other than to pay, upon receipt of an
invoice and supporting documentation satisfactory to Manitoba, such
compensation as the Vendor may be entitled to receive under the Contract
and the applicable Purchase Order(s) for Service/Supply/Work completed
to the satisfaction of Manitoba up to the effective date of termination.
ENVIRONMENTALLY PREFERABLE PRODUCTS:
Manitoba generally awards the bid to the lowest "overall" price of an
acceptable product, however, preference may be given to products which
are 'more environmentally preferable" and support Manitoba's Sustainable
Development Procurement Guidelines.
Product pricing may be only one of the components to be considered in
the overall evaluation of "environmentally preferable products".
Examples of "Environmentally Preferable Products" are as follows:
PACKAGING: Preference may be given to products which use less
packaging, packaging containing recycled content or packaging that can
be recycled, etc. (providing the packaging still provides proper and
adequate protection to the product offered for sale). Bidders to
provide details regarding the packaging, if applicable, for each item
offered.
Pallet size to be 42 inches width by 48 inches depth, loaded to a
maximum height of 53 inches (if required).
All goods delivered must be suitably marked with proper documentation
such as packing slip, contract number, etc.
A packing slip MUST accompany shipment. All packing slips, exterior
labelling and invoices must reference the Purchase Order number.
PRODUCTS, RECYCLED OR RECYCLABLE: Preference may be given to products
containing recycled content or which may be recycled.
Bidders to provide details regarding the percentage of "Total Recycled
Content" and "Post Consumer Waste Content", if applicable, for each item
offered.
"TOTAL RECYCLED CONTENT" means the percentage of all recycled materials
including manufacturer's trimmings, cuttings, overruns and post-consumer
waste.
"POST CONSUMER WASTE CONTENT" means the proportion of recycled material
that has been sold to a consumer and collected after their use in a
recycling program, e.g. used aluminum cans, etc.
PRODUCTS, MORE ENVIRONMENTALLY PREFERABLE: Preference may be given to
products which generally meet or exceed the above specifications and can
demonstrate satisfaction in relation to the end users requirements.
These products will be classified "more environmentally preferable"
through a recognized certification program.
INDIGENOUS BUSINESS STANDARD FOR "GOODS WITH RELATED SERVICES"
DEFINITIONS:
"Indigenous Business" means a business that is at least 51% Indigenous
owned and controlled and, if it has six or more full-time employees, at
least one-third of its employees must be Indigenous persons.
"Indigenous Business Directory" means a business directory of Indigenous
businesses that meet Manitoba's definition of an Indigenous business.
'Indigenous Business Standard" means terms and conditions that indicate
that Indigenous business participation is desirable but not mandatory.
"Indigenous Person" means a First Nations, Non-status Indian, Métis or
Inuit person who is a Canadian citizen and resident of Canada.
INDIGENOUS PROCUREMENT INITIATIVE:
Manitoba is committed to community economic development as a key
component of its economic strategy. It intends to develop a provincial
economy that is more inclusive, equitable and sustainable.
Procurement practices are one means that can be used to contribute to
the growth of Indigenous businesses. In that regard, Manitoba developed
the Indigenous Procurement Initiative (IPI). The objective of IPI is to
increase the participation of Indigenous businesses in providing goods
and services to Manitoba.
INDIGENOUS BUSINESS STANDARD:
Indigenous participation is desired but bids will not be disqualified if
there is no Indigenous business participation.
INDIGENOUS BUSINESS DIRECTORY:
Manitoba has established a directory of Indigenous businesses called the
"Indigenous Business Directory". This directory is a list of Indigenous
businesses (including non-profit organizations and economic development
corporations) that have self-declared as an Indigenous Business meeting
that definition under the IPI. It is neither comprehensive nor
exhaustive but may be a useful resource to identifying Indigenous
businesses for potential partnering or sub-contracting purposes.
Indigenous businesses not listed in the Directory may also be used.
Registration in the Indigenous Business Directory does not guarantee
certification as an Indigenous business, as business status may change;
therefore formal certification is required in the formal tender process.
Indigenous businesses are encouraged to register by contacting
Procurement and Supply Chain Division.
For further information on the Indigenous Business Directory,
registration forms and access to a copy of the Indigenous Business
Directory please see the following website:
http://www.gov.mb.ca/finance/psb/api/api bd.html or contact:
Manitoba Central Services
Procurement & Supply Chain
600 - 352 Donald Street
General Inquiry Line
Ph: 204-945-6361
email:ProcServ@gov.mb.ca
For all other general inquiries related to this tender opportunity,
please contact the name of the individual(s) identified on page one of
this tender document.
Please Note:
For all other general inquiries related to this tender opportunity,
please contact the name of the individual(s) identified on page (1) one
of this tender document.
VENDOR INFORMATION
RIGHT TO REISSUE RFQ:
Manitoba reserves the right to cancel and/or reissue the RFQ where, in
Manitoba's sole opinion, none of the quotes submitted in response to the
RFQ warranty acceptance or where it would be in the best interests of
Manitoba to do so. Costs incurred in the preparation, presentation and
submission of a quote shall be borne by the Bidder. Manitoba shall not
reimburse any Bidders for any costs, if the RFQ is cancelled or
reissued.
AUTHORIZED VENDOR:
Manitoba reserves the right, prior to any contract award, to secure
evidence to Manitoba's satisfaction that the Bidder is the manufacturer,
authorized distributor, dealer or retailer of the goods offered and is
authorized to sell, service and warranty these goods in Manitoba, Canada
and upon request will provide Manitoba with written evidence thereof.
Manitoba also reserves the right to secure evidence to Manitoba's
satisfaction that any Bidder is able to provide the goods or services
and to require the successful Bidder to furnish security, free of any
expense to Manitoba, to guarantee faithful performance of the contract.
The bidder warrants that there are no patents, trademarks or other
rights restricting use, repair or replacement of the material furnished
or any part thereof and hereby agrees to indemnify and save harmless the
Province of Manitoba, its employees and agents from and against all
claims, demands, losses, costs, damages actions, suits or other
proceedings by whomsoever made, filed or prosecuted in any manner by
reason of such use, repair or replacement of the materials being a
violation of any patent, trademark or other right.
CONFLICT OF INTEREST:
The bidder must take appropriate steps to ensure that neither the
bidder, nor the bidders employees are placed in a position where there
is or may be an actual conflict, or a perceived potential conflict
between the bidder, its employees and any agent or representative of the
Province of Manitoba.
The bidder shall not offer or give, or agree to give, to any agent,
employee or representative of the Province of Manitoba any gift or
consideration of any kind as an inducement or reward for doing,
refraining from doing, or for having done or refrained from doing, any
act in relation to the obtaining or execution of this or any other
purchase order/contract with the Province of Manitoba.
No agent, employee or representative of the Province of Manitoba shall
either solicit or accept gratuities, favors or anything of monetary
value from the bidder.
If the bidder has reason to believe any agent, employee or
representative of the Province of Manitoba has violated any provision of
this Conflict of Interest section, the bidder shall immediately notify t
Division of the suspected violation by sending notice to the Director of
Procurement and Supply Chain Division, explaining the situation in full.
The bidder's failure to so notify the Director shall be a material
breach of this agreement and the Director, at his/her option, may
terminate the purchase order/contract.
DISCLOSURE OF INFORMATION:
Relative to the Freedom of Information and Protection of Privacy Act,
the Government of Manitoba reserves the right to publicly disclose
details of purchase order/contract and the prices at its discretion, or
as required by law.
PUBLICITY, MEDIA AND OFFICIAL ENQUIRIES:
Neither the bidder nor its suppliers/vendors, employees or consultants
shall make any public statement relating to the existence or performance
of the purchase order/contract without the prior written consent of the
Province of Manitoba, which shall not be unreasonably withheld. The
provision of this condition shall apply during the extension of a
purchase order/contract and indefinitely after its expiry or
termination.
CONFIDENTIALITY:
The content of this RFQ and any other information received by the Bidder
relating to the RFQ, gained through the RFQ process or otherwise, is to
be treated in strict confidentiality. The Bidder shall not disclose any
of the information in whole or in part to anyone not specifically
involved in the preparation of the Bidder's quotation, unless written
consent is secured from Manitoba prior to the said disclosure. The
obligation of each Bidder to maintain confidentiality shall survive the
expiration or the acceptance/rejection of their quotation and/or any
resulting Contract/ Agreement(s) to supply the requirements of this RFQ.
CLARIFICATIONS AND AMENDMENTS TO REQUIREMENTS:
Manitoba reserves the right to amend or to clarify the RFQ requirements
and to seek clarifications or amendments from Bidders. However,
Manitoba is under no obligation to seek clarification.
FAVOURED CUSTOMER:
If during the period of the offer the Bidders offers for sale like
quality and quantity similar to customers at more favorable terms, the
current quoted price shall be immediately altered to a level that
reflects the same favorable terms.
RIGHT TO WAIVE NON-COMPLIANCE:
Manitoba reserves the right to waive any minor non-compliance with the
bid submissions at its sole discretion.
RISK OF LOSS:
Regardless of FOB Point, Bidder shall bear all risks of loss, injury or
destruction of goods and materials ordered herein which occur prior to
acceptance by Manitoba. No such loss, injury or destruction shall
release Bidder from any obligation hereunder.
UNFORESEEABLE EVENT:
An unforeseeable event is anything which is beyond the control of the
parties affected and which, by exercise of reasonable diligence by the
parties aforementioned, could not be avoided including, but not limited
to, the following: Fire; Explosion; Action of the Elements; Strikes;
Rationing of Materials; Adverse Government Decision; or Act of God.
Neither the Bidder nor Manitoba shall be liable to the other for any
delay in, or failure of, performance under the quotation due to an
unforeseeable event. Any such delay in or failure or performance shall
not constitute default or give rise to any liability for damages or
either party.
The existence of such causes of such delay or failure shall extend the
period for performance to such extent as determined by Manitoba to
enable complete performance by the Bidder provided reasonable diligence
is exercised after the causes of delay or failure have been removed.
ACCOUNTS RECEIVABLE ADDRESS:
Due to our computerized accounts payable system Bidders are to advise if
your invoice address (Accounts Receivable) is the same as the address
for orders/quotes shown above.
Yes ____ No _____ Initial __________
If No, provide complete details:
Contact Person: _______________________________________________
Address: ____________________________________________________
City/Province/Postal Code: _____________________________________
Telephone:_________________ Fax Number:____________________
E-Mail Address: ______________________________________________
INVOICING AND PAYMENT:
Subject to the following subsections, in consideration the goods
provided or delivered to the satisfaction of Manitoba, Manitoba shall
pay the Contractor an amount not exceeding the amount specified in the
successful Contractor's bid submission.
All invoices shall be issued in writing and satisfactory to Manitoba in
both form and content. The contractor shall also provide to Manitoba
such supporting documents, vouchers, statements and receipts as
requested by Manitoba.
Manitoba shall endeavor to pay the Contractor any fees due within 60
days net after the receipt and approval of the invoice and any
supporting materials requested.
For prompt payment of invoices, Manitoba#s Release/Purchase Order number
must be indicated on the Vendor#s invoice or any correspondence.
Manitoba#s Invoice address is outlined on all Release Orders.
PAYMENT TERMS:
Manitoba will consider Early Payment Terms. Manitoba's standard payment
term is net sixty (60) days.
Bidder shall specify their standard invoice term: _______________
Any applicable discounts for early payment?
Yes _____ No _____ Initial __________
If Yes, please specify: ______________________________________
Does your early payment clause appear on your invoice?
Yes _____ No _____ Initial __________
CANADIAN FUNDS:
Manitoba prefers to receive quotations in Canadian funds. If the
pricing offered is quoted in a currency other than Canadian then the
currency must be clearly identified on the quote document.
MANITOBA RETAIL SALES TAX LICENSE:
Are you licensed by Manitoba Finance to collect and remit Manitoba
Retail Sales Tax?
Yes ____ No _____ Initial __________
If NO, disregard the following clause.
MANITOBA RETAIL SALES TAX:
Is the product(s) offered subject to Manitoba Retail Sales Tax?
Yes ____ No _____ Initial __________
If the tender consists of both taxable (T) and non-taxable (NT) items,
please indicate T or NT opposite each item offered.
YOUR QUOTATION REFERENCE # (if applicable) _________
Goods and Services Tax:
Manitoba certifies that the fees payable to the Vendor for the
Service/Supply/Work being provided pursuant to the Contract are being
purchased with Crown funds for the benefit of the Government of Manitoba
and are therefore are not subject to the payment of the federal goods
and services tax (#GST#). Manitoba#s GST number is R107863847. The
Vendor warrants that the GST shall not be included in any invoice
provided or claim for payment made under the Contract.
Proposed Delivery Address:
DELIVERY ADDRESS:
1550 DUBLIN AVE
WINNIPEG MB
R3E 0L4
PHONE: (204)945-5951 KEVIN MORISON
1525 1ST STREET NORTH
BRANDON MB R7C 3B3
PHONE: (204)726-6816 JEAN PASCHE
257 Industrial Road
DAUPHIN MB R7N 3B3
PHONE: (204)622-2273 KIM URIAS
375 3rd Street E
THE PAS MB R9A 1L2
PHONE: (204)627-8282 KEN HUCULAK
7 Gay St
THOMPSON MB R8N 1N7
PHONE: (204)677-6548 DAN CONNER
PR #302
BEAUSEJOUR MB R0E 0C0
PHONE: (204)268-6263 JON PAYMENT
TENDERS TO BE RETURNED TO:
Submissions via Merx only.
