AB-2026-01048 - Annual Contract Crack Sealing on Select Paved Roads

WORK INCLUDED
a) The Work consists of filling cracks in the paved surfaces in the areas designated by the Chief Administrative Officer. All cracks wider than 5 mm and less than 25 mm in width are to be crack sealing for the entire width of the paved roadway. The entire width includes any climbing lanes, roadside turnouts, acceleration/deceleration lanes, and intersectional flares for the edge of right-of-way.
b) Prior to the application of crack sealant, the Contractor shall ensure that the road surface adjacent to the cracks is clean.
c) Excess crack sealant shall be removed from the pavement surface immediately following application. Removal shall involve the use of a squeegee, starting from the centerline and proceeding to the shoulder.
d) Fuel, asphalt and any other spills shall be cleaned up to the satisfaction of the Chief Administrative Officer at the Contractor’s expense.
e) The Contractor shall meet with the Chief Administrative Officer, or his Designate, prior to the commencement of operations, to review and agree upon the proposed work plan and schedule. This will be done to ensure that critical portions of the work are completed on schedule and to reduce areas of conflict with traffic and other work projects.
f) The proposed work plan will include a traffic accommodation plan and an environmental site plan.
g) A pre-start up meeting is required to address safety items required from the successful company