This procurement is subject to the Canadian Free Trade Agreement.
Where the estimated value of the goods or services to be procured is below the lowest applicable threshold value of any relevant trade agreement, Service New Brunswick reserves the right to give preferential treatment to a prospective supplier from New Brunswick. Should this right be exercised, the following order of priority will apply: a) firstly, New Brunswick manufacturers if the goods to be procured are manufactured in New Brunswick; and b) secondly, New Brunswick vendors.
When bid submissions are evaluated on price:
- Applicability of the preferences will be determined based on the price differential between the lowest-priced acceptable bid and the bid receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will be limited to 10%. When the lowest-priced acceptable bid before preferential treatment is applied is a New Brunswick vendor, the price differential under which a NB manufacturer preference will be applied will be limited to 5%.
- The preferential treatment will be applied by making the award to the NB supplier.
When bid submissions are evaluated on a point system:
- Applicability of the preferences will be determined based on the price differential between the pricing component of the highest scoring acceptable bid submission and the pricing component of the bid(s) receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will be limited to 10%. When the highest scoring acceptable bid submission before preferential treatment is applied is a New Brunswick vendor, the price differential under which a NB manufacturer preference will be applied will be limited to 5%.
- The preferential treatment will be applied by allotting a maximum of an additional 5% of the total possible points to New Brunswick manufacturers' total scores and 4% to NB vendors' total scores. If no bid from a New Brunswick manufacturer has been retained for preferential treatment, New Brunswick vendors may receive a maximum of an additional 5% of the total possible points rather than 4%.
The decision to apply a preference will be at the sole discretion of Service New Brunswick. To be eligible, suppliers must meet the definition of NB supplier as identified by the regulation under the
Procurement Act. NB manufacturers should indicate in their bid that they are a NB manufacturer to be considered for the NB manufacturer preference.
Where permissible under the applicable trade agreements and the regulation under the
Procurement Act, Service New Brunswick reserves the right to give preferential treatment to a prospective supplier from New Brunswick. Should this right be exercised, the following order of priority will apply: a) firstly, New Brunswick manufacturers if the goods to be procured are manufactured in New Brunswick; and b) secondly, New Brunswick vendors.
When bid submissions are evaluated on price:
- Applicability of the preferences will be determined based on the price differential between the lowest-priced acceptable bid and the bid receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will vary between 2.5% and 10% depending on the total estimated value of the procurement, in accordance with the ranges set out in the regulation under the
Procurement Act.
- The preferential treatment will be applied by making the award to the NB supplier.
When bid submissions are evaluated on a point system:
- Applicability of the preferences will be determined based on the price differential between the pricing component of the highest scoring acceptable bid submission and the pricing component of the bid(s) receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will vary between 2.5% and 10% depending on the total estimated value of the procurement, in accordance with the ranges set out in the regulation under the
Procurement Act.
- The preferential treatment will be applied by allotting a maximum of an additional 5% of the total possible points to New Brunswick manufacturers' total scores and 4% to NB vendors' total scores. If no bid from a New Brunswick manufacturer has been retained for preferential treatment, New Brunswick vendors may receive a maximum of an additional 5% of the total possible points rather than 4%.
The decision to apply a preference will be at the sole discretion of Service New Brunswick. To be eligible, suppliers must meet the definition of NB supplier as identified by the regulation under the
Procurement Act. NB manufacturers should indicate in their bid that they are a NB manufacturer to be considered for the NB manufacturer preference.
New Brunswick Manufacturer Preference
By stating YES in the input box,
I confirm that I am a Manufacturer of goods
with a place of business in New Brunswick as defined below and am therefore eligible to be considered for the NB Manufacturer preference as defined in this solicitation document. If the input box is left incomplete the bid may be ineligible for the New Brunswick Manufacturer preference.
Place of business means an establishment where a manufacturer regularly conducts its activities on a permanent basis, is clearly identified by name and is accessible during normal business hours.
New Brunswick Vendor Preference
By stating YES in the input box,
I confirm that I am a Vendor of goods or services
with a place of business in New Brunswick as defined below and am therefore eligible to be considered for the NB Vendor preference as defined in this solicitation document. If the input box is left incomplete the bid may be ineligible for the New Brunswick Vendor preference.
Place of business means an establishment where a vendor regularly conducts its activities on a permanent basis, is clearly identified by name and is accessible during normal business hours.
*****AMENDMENT #3*****
Question 1
When are the rails and the carriages expected to be purchased? Is this a future purchase?
Initially if I understand correctly, shelving will go up statically, then dismantled sometime in the future the room emptied and the floor will be trenched for rails and both rails and carriages will be purchased?
Answer
Correct, this racking will be static for at least five (5) years then relocated to a new building where the storage area will be designed using this racking where at that time the rail and carriages will be purchased.
Question 2
Based on the quantity of racking for this project it will be shipped on flatbed truck(s). Will the vendor be responsible to unload the trucks and get the racking into the facility?
Answer
Yes, the vendor will be responsible to unload the racking and store it no further than 200' from the over head door. The overhead door is not a loading dock.
Question 3
Industry standard is 3" increment in pallet racking beam adjustability. Please confirm you are accepting of 3" increments in regards to beam adjustability, and not 2"?
Answer
Yes, 3" increments are acceptable.
**********************************************************************************
*****AMENDMENT #2*****
Question 1
The Step Beams specfications state a certain size, KSI rating and paint requirements - Are substitutes available?
Answer
We have strict sprinkler and height requirements so we based the sizes on that. Submit your beam sizes and note that they meet the 56 KSI.
Question 2
Our Back-to-Back Spacers are a pre-galvanized product, not painted. Is this OK to substitute?
Answer
Yes
Question 3
Our racking guards / post protectors are powder coated yellow as a standard. To have them galvanized would take roughly 12-15 weeks. Is this pallet racking being stored outside? Is there a reason they need to be galvanized? Is so, does the pallet racking need to be galvanized too as an option?
Answer
The client does not want them to be painted.
Question 4
How are bidders to provide an engineered stamped drawing, for something you are looking to modify? All components are pre-engineered and are required to be anchored to a concrete slab.
Answer
We want the stamp for the pre-engineered parts to insured it's what we spec'd, similar to structural shop drawings.
The vendor is not stamping the installation drawings because they are not installing it, we will have it inspected by an engineer after it's installed at the temporary location and again after it's relocated and modified.
******************************************************************************************
*****AMENDMENT #1*****
Question 1
Could you confirm that you are looking for pallet racking that is mobile ready meaning in the future you are going to put carriages on it and lay track on the floor converting it to High Density Mobile Storage?
Answer
Yes, this shelving will be converted to high density using carriages and the tracks will be recessed in the floor.
Question 2
Please confirm the end user will only accept Galvanized Steel.
Answer
The user requested the galvanized corner guards because there will be forklift use, plastic is not acceptable.
Question 3
Is there a site visit available ?
Answer 3
There is no site visit scheduled.
*****************************************************************************************
SCOPE
This Invitation to Tender consists of the supply and delivery of a Mobile Warehouse Storage Racking System described as per the tender specifications and drawings.
CONTRACT AWARD CRITERIA
Contract will be award to the lowest compliant bid which meet or exceeds the requirements detailed within the attached specifications and drawings of the tender.
Prior to Contract award, the Department of Transportation and Infrastructure may consult with other departments and agencies of the Province of New Brunswick to obtain information on the Vendor's past performance within the previous five (5) years. Results from the aforementioned consultations that are unsatisfactory to the Department, in its sole and absolute discretion, will result in the disqualification of the Vendor's bid.
SUBMITALS
Contractor must provide New Brunswick Engineer stamped drawings.
DELIVERY DATE AND PRICE
The Supplier shall deliver all materials to Department's of Transportation and Infrastructure, Lancaster Warehouse, Saint John, NB on or before March 31, 2023. Delivery after this date may result in cancellation of the order.
Shipping charges MUST be included in pricing.
VENDOR QUESTIONS
All inquiries should be received five (5) calendar days prior to the closing date; any inquiries received less than five (5) calendar days prior to the closing date cannot be guaranteed a response. Please reference the tender number and closing date within your communications to ensure a prompt and accurate reply.
REQUIREMENTS
VENDORS ARE REQUIRED TO SIGN AND DATE THEIR BID IN THE SPACE PROVIDED BELOW
This is a tender notice only. In order to submit a bid, you must obtain official tender documents from the New Brunswick Opportunities Network, another authorized tendering service or as indicated in the tender notice.
Direct Deposit
The Province of New Brunswick is now using Direct Deposit as the standard method of issuing payments. Suppliers are required to provide bank account information and an email address for the notice of remittance. Please send the completed Direct Deposit Form to Service New Brunswick (e-mail address and mailing address are indicated on the form).
Please click on the link below to view the Direct Deposit Form.
https://www2.snb.ca/content/dam/snb/Procurement/DirectDepositVirementDirect.pdf
Instructions for Bid Submission
1. Effective April 15, 2020, Service New Brunswick is no longer accepting paper bids,
and the Central Tendering Branch is closed to the public. Public tender openings are
no longer taking place; however, results continue to be posted on NBON.
2. Bids will only be accepted by electronic transmission as follows:
a. By e-bidding through NBON (when e-bidding is possible); OR
b. By fax to: (506) 444-4200 (fax to dedicated mailbox).
Note: Proposals in response to a Request for Proposals (RFP) will not be accepted by fax; OR
c. By email to NBBids@snb.ca or SoumissionsNB@snb.ca (do not submit bids to any other email).
Click here
Instructions for Bid Submission for important instructions on how to submit bids by email.
d. Please refrain from submitting your bid through multiple electronic channels
to avoid duplicate bids.
3. All bids must be properly signed by an authorized person.
a. For bids submitted by email or fax: typed signatures (in any font)
that are not on the bid itself (i.e. in the body of the email or on the
fax cover sheet) will NOT be accepted.
4. All bids must be legible, properly completed and contain the proper solicitation number.
5. The proponent is solely responsible for ensuring that the bid submission
in its entirety, including all attachments, is received before Closing Date and Time
as indicated on the solicitation documents.
a. The proponent bears all risk associated with delivering its bid by electronic
submission, including but not limited to delays in transmission between the Proponent's computer and the Province's Electronic Mail System, NBON or fax.
b. The date and time of official receipt of the bid will be the time of receipt
recorded in the NBON system (for e-bids) or the time of receipt in the Province's
Electronic Mail System (for fax and email bid submissions).
6. All bids must be stated in Canadian Funds. Sales taxes should not be included in
the unit, extended or total prices.
7. All tenders must be F.O.B. destination, freight prepaid.
8. This Invitation is being conducted under the provisions of the Procurement Act
and Regulation 2014-93 as of the date of the issuance of the Invitation.
A bidder must obtain official solicitation documents from a distribution service, authorized by the Minister of Service New Brunswick, in order to submit a bid. The current authorized distribution services are the
New Brunswick Opportunities Network (NBON) (operated by Service New Brunswick, Province of NB),
BIDSAlert (operated by Tendering Publications Ltd.) and
MERX (operated by Mediagrif Interactive Technologies). Bids should be submitted on the official bid documents
obtained from these authorized distribution services.
The province of New Brunswick reserves the right to negotiate pricing, value added and other savings opportunities with the successful proponent at time of award and throughout the contract.
All suppliers engaged to deliver services on behalf of the Government of New Brunswick must ensure compliance with the
Official Languages Act in the delivery of those services. For more information, please refer to the
Official Languages Act.
COVID-19 Restrictions for Workers entering New Brunswick
All suppliers and workers entering the province of New Brunswick for work purposes must comply with the requirements established by WorkSafe NB and Public Health, including isolation requirements where applicable.
Click here for more information on these requirements.
The Atlantic Provinces Standard Terms & Conditions for Goods and Services apply to this procurement and are considered to be incorporated into this document. By submitting a bid, you agree and accept these terms and conditions. Current "Atlantic Provinces Standard Terms and Conditions" are available on the New Brunswick Opportunities Network, the Council of Atlantic Premiers' Website or from an authorized service provider.
COVID-19 Supplier Vaccination Policy
Suppliers must comply with all GNB health and safety policies and standards including, without limitation, all health and safety policies and standards related to COVID-19, as applicable. Go to www.gnb.ca/nbon to view the full policy and FAQs.
Under Canadian law (and international agreements), your Bid must arrive separately and independently, without conspiracy, collusion or fraud; see http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/home for further information.
QUESTIONS:
Written questions relating to this opportunity may be submitted to the address provided below via email by clicking on Questions. Please be sure to include the solicitation/tender number in the subject line.
EMAIL ADDRESS: bidquestionssoumissions@snb.ca
NOTE:
This email account is strictly for the receipt of questions on open opportunities. This email is not for the submission of bids.
Solicitation documents will be provided in either of the Province of New Brunswick's two official languages; English or French upon request.
Pay Equity
Does your organization have 50 or more employees?
The Government of New Brunswick is committed to encouraging and incentivizing the adoption of pay equity by employers doing business with government.
Prior to the award of procurements for goods and services valued over $1,000,000, suppliers, with fifty (50) or more employees will be required to complete the Pay Equity Learning Module developed by the Women's Equality Branch. Suppliers should provide a copy of their certificate of completion with their bid submission.
To complete the online module and obtain your certificate, please visit www.gnb.ca/payequity. For questions, please contact the Pay Equity Bureau toll free: (877) 253-0266 or by Email: peb-bes@gnb.ca.
All discounts quoted will be considered to be without limitations.
Award of contracts: no contract shall be awarded and no payment shall be made to a vendor unless authorized by the Minister or his delegates. The Minister may make an award to the preferred vendor conditional on the negotiation and acceptance of a detailed contract between the Province and the vendor. In such cases, should the detailed contract negotiations not be completed in a reasonable period of time, the Province reserves the right to discontinue negotiations with the vendor and
subsequently enter into negotiations with the second preferred vendor.
No right or duty, in whole or in part, of the vendor under a contract issued may be assigned or delegated without the prior consent of the Strategic Procurement Branch.
Unless indicated otherwise in this tender notice or attached documents, all prices must be extended and totalled.
All Suppliers engaged to deliver goods or services to the Government of New Brunswick must ensure compliance with the Designated Materials Regulation in the provision or delivery of those goods obligated under that Regulation. Please refer to
Recycle NB's website and the
Designated Materials Regulation for specifics.
PAYMENT OF INVOICES
Payment of invoices is the responsibility of the department or organization to whom the goods are shipped or services are supplied.
