Tender208825 - Tender208825 - Digger Truck for Norman Wells

NTPC is looking to procure one (1) utility service truck.

These specifications are not intended as complete design specifications to be used for design and manufacture. It is left to the manufacturer to provide all components not specifically mentioned herein in keeping with good engineering practice. In addition, the equipment must comply with the most current version of the “Northwest Territories Highway Traffic Act”, “Canada Motor Vehicle Act”, the “Construction Safety Act”, the “Occupational Health and Safety Act”, regulation #312-91 and CSA C225-2010 and CSA C225 M88 for stability.

All trucks shall be to the manufacturer’s standards. They shall be equipped with all manufacturer’s equipment and accessories, which are included as standard in the advertised literature for the unit. No such item or equipment shall be removed or omitted because it is not specified in this document.

Units are to be delivered in turnkey condition, with all necessary vehicle and equipment qualifications and certificates (NDT Testing and Die-Electric).

Multiple sets of operators, parts, and maintenance manuals are to be supplied. NTPC to perform a final inspection prior to delivery to ensure compliance.
Specifications are as follows:

- Crew cab. Winter Package. 4x4 capable.
- Altec/Terex
- 100 Degrees of Boom Travel (+80 to -20)
- Dual Lift Cylinders
- Self-Aligning Swivel Ball Bushings
- Rectangular, Bi-Axial Epoxy Resin, Filament Wound Fiberglass Booms
- Box Fabricated Steel Lower Boom and Intermediate
- Hydraulic Boom Extension Intermediate & Upper
- Full Pressure Hydraulic Controls
- Full Pressure, Open-Center Hydraulic System
- 50 Gallon Hydraulic Oil Reservoir
- Custom Made Zoned Load Chart
- Continuous Unrestricted Rotation
- 15,000 lb. Turntable Winch
- Load-Sensing Worm Gear Rotation
- Engine Stop/Start at Lower Controls
- Load Moment Limiter
- Boom Angle Indicator
- Outrigger Interlock
- Moving Outrigger Alarm
- Truck Level Indicator
- Various Diggers/augers, along with auger storage
- Boom tip winch
- Hydraulic tool outlets
- Wabasto Heater
- Backup alarm & Backup Camera
- Dual fuel tanks
- Capstan hoist/take up reel for end of boom