This procurement is subject to the Quebec-New Brunswick Procurement Agreement and the Canadian Free Trade Agreement.
No totals required.
Where permissible under the applicable trade agreements and the regulation under the
Procurement Act, Service New Brunswick reserves the right to give preferential treatment to a prospective supplier from New Brunswick. Should this right be exercised, the following order of priority will apply: a) firstly, New Brunswick manufacturers if the goods to be procured are manufactured in New Brunswick; and b) secondly, New Brunswick vendors.
When bid submissions are evaluated on price:
- Applicability of the preferences will be determined based on the price differential between the lowest-priced acceptable bid and the bid receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will vary between 2.5% and 10% depending on the total estimated value of the procurement, in accordance with the ranges set out in the regulation under the
Procurement Act.
- The preferential treatment will be applied by making the award to the NB supplier.
When bid submissions are evaluated on a point system:
- Applicability of the preferences will be determined based on the price differential between the pricing component of the highest scoring acceptable bid submission and the pricing component of the bid(s) receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will vary between 2.5% and 10% depending on the total estimated value of the procurement, in accordance with the ranges set out in the regulation under the
Procurement Act.
- The preferential treatment will be applied by allotting a maximum of an additional 5% of the total possible points to New Brunswick manufacturers' total scores and 4% to NB vendors' total scores. If no bid from a New Brunswick manufacturer has been retained for preferential treatment, New Brunswick vendors may receive a maximum of an additional 5% of the total possible points rather than 4%.
The decision to apply a preference will be at the sole discretion of Service New Brunswick. To be eligible, suppliers must meet the definition of NB supplier as identified by the regulation under the
Procurement Act. NB manufacturers should indicate in their bid that they are a NB manufacturer to be considered for the NB manufacturer preference.
New Brunswick Manufacturer Preference
By stating YES in the input box,
I confirm that I am a Manufacturer of goods
with a place of business in New Brunswick as defined below and am therefore eligible to be considered for the NB Manufacturer preference as defined in this solicitation document. If the input box is left incomplete the bid may be ineligible for the New Brunswick Manufacturer preference.
Place of business means an establishment where a manufacturer regularly conducts its activities on a permanent basis, is clearly identified by name and is accessible during normal business hours.
New Brunswick Vendor Preference
By stating YES in the input box,
I confirm that I am a Vendor of goods or services
with a place of business in New Brunswick as defined below and am therefore eligible to be considered for the NB Vendor preference as defined in this solicitation document. If the input box is left incomplete the bid may be ineligible for the New Brunswick Vendor preference.
Place of business means an establishment where a vendor regularly conducts its activities on a permanent basis, is clearly identified by name and is accessible during normal business hours.
**** Amendment #1***
Please note that this tender has been amended for administrative purposes.
All other information remains the same.
******
Description:
The Department of Transportation and Infrastructure wishes to obtain Maintenance and Repair Services for New Brunswick's Highway Truck Scales (as listed in Appendix A of the attachment to this tender).
The services required will include (but are not limited to);
- Testing and calibration of all listed heavy truck scales.
- Repairs and/or Preventive Maintenance services for all listed heavy truck scales.
- Provision and installation of scale parts such as weigh bars, load cells and indicators, as well as ancillary parts.
- Provision of a boom truck, certified test weights and operator.
Requirements
The vendor must submit credentials with their bid.
The vendor must provide responses to the following points in order to be considered for an award on this tender. Vendor MUST include this information with the bid submission, or it will be disqualified as incomplete:
- Provide details on the training / certification / accreditation / qualifications that the bidder possesses which qualifies them to provide services for these heavy truck scales.
- Identify how many hours of experience the bidder has in providing services for these heavy truck scales and identify how recent this experience is [i.e. what year(s)].
- Provide information relating to experience the bidder has had in testifying in court as to their qualifications for testing and certifying these heavy truck scales. Indicate the most recent year for providing such testimony.
- Any other relevant information.
Contract Term:
The resulting contract will be effective for a two year period from April 12, 2021 to March 31, 2023 with three optional renewal years (from April 1, 2023 to March 31, 2024, from April 1, 2024 to March 31, 2025 and April 1, 2025 to March 2026), at the discretion of the Province, and on receipt of written application to renew from the successful vendor). The written renewal application must be received by December 1 of the year, for the following option year and must include
details on any request for variance(s) from the original contract. (The department will be the sole approver of any changes to the agreement.)
For each location listed in this tender, Vendors are required to submit prices for:
a) Replacement weigh bars and/or load cells
b) Replacement indicators
c) Testing and calibration, and repair services (hourly rates)
d) Supply of boom truck, certified test weights and operator (hourly rates)
All pricing must include shipping costs to final destination.
The successful bidder shall schedule work in coordination with other vendors, if applicable, for the provision of parts and services in this tender.
The attachment to this tender includes vendor specifications, all scale locations, corresponding model numbers and instrumentation currently used.
Replacement Parts:
For Avery Weigh Tronix brand scales, all replacement parts such as load cells, weigh bars and indicators, except for ancillary scale parts, must be Avery Weigh Tronix, or equivalent.
For all other brands of scales, all replacement parts such as load cells, weigh bars, indicators and ancillary scale parts must be the same as the brand of the scale at that location, or equivalent.
All replacement parts supplied must be compatible with the existing scale components. Parts are to be delivered as and when required for the period indicated at the request of the department.
Schedules:
Frequency of testing and calibration of scales will be 3 to 6 cycles per year. Repairs will be on an as-required basis.
Service/Maintenance Agreement:
The contract will be awarded to the lowest compliant bid for all locations. Bidders must bid on all items to be considered for award.
The successful vendor will be required to sign the Province's "Service/Maintenance Agreement" before a final contract can be signed. If no agreement is reached within 30 days of the closing date of the tender, the Province reserves the right to cancel this proposed award and move on to the next compliant bid.
PLEASE REVIEW THE ATTACHED DOCUMENT WHICH CONTAINS SPECIFICATIONS AND OTHER REQUIREMENTS.
***** VENDORS ARE REQUIRED TO SIGN AND DATE THEIR BID IN THE SPACE PROVIDED BELOW. *****
This is a tender notice only. In order to submit a bid, you must obtain official tender documents from the New Brunswick Opportunities Network, another authorized tendering service or as indicated in the tender notice.
New Bidding Method
Instructions for Bid Submission Effective April 15th
Due to the current pandemic situation, Service New Brunswick will not be accepting paper bids. Bids will only be received in the following manner:
a. By email to: NBBids@snb.ca or SoumissionsNB@snb.ca (do not submit proposals to any other email); OR
b. By e-bidding through NBON (when e-bidding is possible); OR
c. By fax to: (506) 444-4200 (fax received into dedicated email inbox)
Note: Proposals in response to a Request for Proposal (RFP) will not be accepted by fax.
Click here
Instructions for Bid Submission for instructions on bid submission.
-------------------------------------------------------
All bids must be stated in Canadian Funds.
All tenders must be F.O.B. destination, freight prepaid.
Sales taxes should not be included in the unit, extended or total prices.
This Invitation is being conducted under the provisions of the Procurement Act and Regulation as of the date of the issuance of the Invitation. Bidders may obtain a copy of the Act and Regulation on-line free of charge Procurement Act, Regulation or a paper copy may be purchased from the Queen's Printer, Province of N.B., P.O. Box 6000, Fredericton, N.B. E3B 5H1.
All suppliers engaged to deliver services on behalf of the Government of New Brunswick must ensure compliance with the
Official Languages Act in the delivery of those services. For more information, please refer to the
Official Languages Act.
QUESTIONS:
Written questions relating to this opportunity may be submitted to the address provided below via email by clicking on Questions. Please be sure to include the solicitation/tender number in the subject line.
EMAIL ADDRESS: bidquestionssoumissions@snb.ca
NOTE:
This email account is strictly for the receipt of questions on open opportunities. This email is not for the submission of bids.
COVID-19 Restrictions for Workers entering New Brunswick
All suppliers and workers entering the province of New Brunswick for work purposes must comply with the requirements established by WorkSafe NB and Public Health, including isolation requirements where applicable.
Click here for more information on these requirements.
Under Canadian law (and international agreements), your Bid must arrive separately and independently, without conspiracy, collusion or fraud; see http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/home for further information.
The Atlantic Provinces Standard Terms & Conditions for Goods and Services apply to this procurement and are considered to be incorporated into this document. By submitting a bid, you agree and accept these terms and conditions. Current "Atlantic Provinces Standard Terms and Conditions" are available on the New Brunswick Opportunities Network, the Council of Atlantic Premiers' Website or from an authorized service provider.
A bidder must obtain official bid documents from a distribution service, authorized by the Minister of Service New Brunswick, in order to submit a bid. The current authorized distribution services are the
New Brunswick Opportunities Network (NBON) (operated by Service New Brunswick, Province of NB),
BIDSAlert (operated by Tendering Publications Ltd.) and
MERX (operated by Mediagrif Interactive Technologies). Failure to submit the official bid documents or provide proof
that the official bid documents were properly obtained will result in rejection of the bid. In order to facilitate the evaluation process, Bidders are requested to respond in the same format as the official bid documents.
All discounts quoted will be considered to be without limitations.
Award of contracts: no contract shall be awarded and no payment shall be made to a vendor unless authorized by the Minister or his delegates. The Minister may make an award to the preferred vendor conditional on the negotiation and acceptance of a detailed contract between the Province and the vendor. In such cases, should the detailed contract negotiations not be completed in a reasonable period of time, the Province reserves the right to discontinue negotiations with the vendor and
subsequently enter into negotiations with the second preferred vendor.
No right or duty, in whole or in part, of the vendor under a contract issued may be assigned or delegated without the prior consent of the Strategic Procurement Branch.
Unless the Strategic Procurement Branch has determined otherwise prior to tender closing, all prices must be extended and totaled.
The province of New Brunswick reserves the right to negotiate pricing, value added and other savings opportunities with the successful proponent at time of award and throughout the contract.
Pay Equity
Does your organization have 50 or more employees?
The Government of New Brunswick is committed to encouraging and incentivizing the adoption of pay equity by employers doing business with government.
Prior to the award of procurements for goods and services valued over $1,000,000, suppliers, with fifty (50) or more employees will be required to complete the Pay Equity Learning Module developed by the Women's Equality Branch. Suppliers should provide a copy of their certificate of completion with their bid submission.
To complete the online module and obtain your certificate, please visit www.gnb.ca/payequity. For questions, please contact the Pay Equity Bureau toll free: (877) 253-0266 or by Email: peb-bes@gnb.ca.
Solicitation documents will be provided in either of the Province of New Brunswick's two official languages; English or French upon request.
All Suppliers engaged to deliver goods or services to the Government of New Brunswick must ensure compliance with the Designated Materials Regulation in the provision or delivery of those goods obligated under that Regulation. Please refer to
Recycle NB's website and the
Designated Materials Regulation for specifics.
PAYMENT OF INVOICES
Payment of invoices is the responsibility of the department or organization to whom the goods are shipped or services are supplied.
Direct Deposit
The Province of New Brunswick is now using Direct Deposit as the standard method of issuing payments. Suppliers are required to provide bank account information and an email address for the notice of remittance. Please send the completed Direct Deposit Form to Service New Brunswick (e-mail address and mailing address are indicated on the form).
Please click on the link below to view the Direct Deposit Form.
https://www2.snb.ca/content/dam/snb/Procurement/DirectDepositVirementDirect.pdf
Where the estimated value of the goods or services to be procured is below the lowest applicable threshold value of any relevant trade agreement, Service New Brunswick reserves the right to give preferential treatment to a prospective supplier from New Brunswick. Should this right be exercised, the following order of priority will apply: a) firstly, New Brunswick manufacturers if the goods to be procured are manufactured in New Brunswick; and b) secondly, New Brunswick vendors.
When bid submissions are evaluated on price:
- Applicability of the preferences will be determined based on the price differential between the lowest-priced acceptable bid and the bid receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will be limited to 10%. When the lowest-priced acceptable bid before preferential treatment is applied is a New Brunswick vendor, the price differential under which a NB manufacturer preference will be applied will be limited to 5%.
- The preferential treatment will be applied by making the award to the NB supplier.
When bid submissions are evaluated on a point system:
- Applicability of the preferences will be determined based on the price differential between the pricing component of the highest scoring acceptable bid submission and the pricing component of the bid(s) receiving the preferential treatment.
- The price differential under which a NB supplier preference may be applied will be limited to 10%. When the highest scoring acceptable bid submission before preferential treatment is applied is a New Brunswick vendor, the price differential under which a NB manufacturer preference will be applied will be limited to 5%.
- The preferential treatment will be applied by allotting a maximum of an additional 5% of the total possible points to New Brunswick manufacturers' total scores and 4% to NB vendors' total scores. If no bid from a New Brunswick manufacturer has been retained for preferential treatment, New Brunswick vendors may receive a maximum of an additional 5% of the total possible points rather than 4%.
The decision to apply a preference will be at the sole discretion of Service New Brunswick. To be eligible, suppliers must meet the definition of NB supplier as identified by the regulation under the
Procurement Act. NB manufacturers should indicate in their bid that they are a NB manufacturer to be considered for the NB manufacturer preference.
